We exported Medical oxygen regulator ,gas regulator and oxygen flowmeter.
1 Outside thread GGA540
thread sizes of the nut which connect the oxygen with the regulator is the CGA540
2 Flow 0-10L/min
the oxygen flow rang that it can adjust is from 1 to 15 l/min
3 Output pressure 0.2-0.3MPa
4 Input pressure 150bar.
when the input pressure of the oxygen regulator is 12MPa-15MPa , the pressure should be able to
fell to 0.2 MPa to 0.3 MPa after decompression
5 This inhaler tide the bottle is a colorless, transparent, and marked the highest and lowest level lines
Notes:
a. Before use, check that all parts are in good condition and wipe with a clean dry
cloth.
b. The pressure gauge (2) and the regulating valve (3) shall not contact grease,
otherwise it will cause an explosion.
c. Please keep all parts clean.
d. The adjustable knob (6) in front of the decompression device should be adjusted
clockwise.
e. Safety valve (7) (15) Please keep away from the dangerous area.
f. Oxygen use as directed by your doctor.
g. After oxygen inhalation, please close the switch of oxygen tube first and
discharge the remaining gas. After the pressure gauge returns to zero, close the
flow switch to avoid explosion.
h. Periodic examinations must be carried out at least once every 6 months.
Audited Supplier 
){kind=link}