40L CylinderValve: QF-2CVolume: ~40LDiameter: 219 Mm Working Pressure: 150 BarTesting Pressure: 250 BarColor : blue10L CylinderValve: QF-2CVolume: ~10LDiameter: 152 MmWorking Pressure: 150 BarTesting Pressure: 250 BarColor : blueN2O gas specification
Specification | Certified concentration | Analytical method |
N2O | ≥99 | ≥99 | % | HG2685-1995 |
CO | ≤10 | ≤10 | ppm | |
CO2 | ≤250 | ≤250 | ppm | |
H2O | ≤100 | ≤100 | ppm | |
NO-NO2 | ≤0.5 | ≤0.5 | ppm | |
N2 | ≤25 | ≤25 | ppm | |
NH3 | ≤5 | ≤5 | ppm | |
.


pay attention to that before use, please open a little bit of the valve and blew the ash off the valve and piping on the grey, because impurities affect the purity of bottle.
So far our products are enjoying good markets at home and exporting to European and American countries, the Middle East countries, West Asia, as well as South and East Asia countries.


Specification of High Pressure |
GB5099 Standard or ISO9809 |
Type | Outside Diameter Do.(mm) | Water Capacity (L) | Height (without valve) (mm) | Weight (without valve cap)W(kg) | Material | Standard | WMA108-1.4-15 | 108 | 1.4 | 238 | 2.96 | 37Mn | GB5099-3 | WMA108-2-15 | 108 | 2.0 | 320 | 3.75 | WMT108-2-15 | 108 | 2.0 | 317 | 3.72 | WMA121-3.2-15 | 121 | 3.2 | 390 | 5.02 | WMT121-3.2-15 | 121 | 3.2 | 385.8 | 4.98 | WMA121-4-15 | 121 | 4.0 | 485 | 6.16 | WMT121-4-15 | 121 | 4.0 | 470 | 5.95 | WMA140-4-15 | 140 | 4.0 | 372 | 5.77 | WMA140-5-15 | 140 | 5.0 | 458 | 7.52 | WMA140-6.3-15 | 140 | 6.3 | 524 | 8.72 | WMA140-7-15 | 140 | 7.0 | 593 | 9.84 | WMA140-8-15 | 140 | 8.0 | 671 | 10.72 | WMA140-10-15 | 140 | 10 | 845 | 13.4 | WMA152-7-15 | 152 | 7.0 | 528 | 9.57 | WMA152-8-15 | 152 | 8.0 | 600 | 10.66 | WMA152-10-15 | 152 | 10.0 | 726 | 12.6 | WMA159-10-15 | 159 | 10.0 | 685 | 14.15 | WMA159-12-15 | 159 | 12.0 | 800 | 16.34 | WMA159-15-15 | 159 | 15.0 | 975 | 19.66 | WMA219-20-15 | 219 | 20.0 | 730 | 29.00 | WMA219-40-15 | 219 | 40.0 | 1310 | 48.00 | WMA232-40-15 | 232 | 40.0 | 1220 | 50.00 | WZA232-47-15 | 232 | 47.0 | 1360 | 51.00 | WMA219-50-15 | 219 | 50.0 | 1600 | 57.00 | WMA232-50-15 | 232 | 50.0 | 1380 | 65.00 | IWGA219-40-15 | 219 | 40.0 | 1380 | 52.00 | 34CrMo4 | ISO9809-1 | IWGA232-40-20 | 232 | 40.0 | 1170 | 52.00 | IWGA232-47-20 | 232 | 47.0 | 1360 | 55.00 | IWGA232-50-20 | 232 | 50.0 | 1440 | 56.00 | Note:1.WMA-Concave Bottom WMT-Convex Bottom 2. Hydraulic test pressure: 25Mpa or 30Mpa 3. Working test pressure: 15Mpa or 20Mpa |
|