| Customization: | Available |
|---|---|
| Customized: | Customized |
| Portable: | Non Portable |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
NK-550A UV gas analyzer
NK-550A UV gas analyzer), this analyzer can measure the concentration of SO2, NO, NO2, O2, NH3, Cl2, O3, H2S, CH3I and other gases, the detection limit is up to 1mg/m3, has the characteristics of high measurement accuracy, high reliability, fast response time, wide range of application, and other indicators meet or exceed similar foreign products. Fully qualified for ultra-low emission monitoring occasion measurement technical index requirements.
Product characteristics
The detection limit of SO2, NOx and other gases reaches 1mg/m3 (15m optical path). Compared with NDIR, the measurement accuracy is completely unaffected by moisture and dust (vapor water does not absorb in the ultraviolet band, while liquid water and dust have non-selective absorption of ultraviolet light, which is a slow change in the spectrum), low detection limit, and small temperature drift. Range ratio up to 10:1, and support automatic range switching;
The light source is pulsed xenon lamp with a lifetime of 109 times. According to 3 times/second calculation, the service life is up to 10 years;
No optical moving parts, not affected by vibration;
NO and NO2x are measured directly in ultraviolet wavelengths without the need for a NO2→ NO converter. NO and NO2 are absorbed in the ultraviolet band. By measuring NO and NO2 at the same time and accumulating NOx, we can save the cost of purchasing NO2→ NO converter for customers, and improve the reliability of the system.
White pool technology +DOAS+PLS technology, zero drift, small quantity drift;
Automatic regulation spectrum technology, long maintenance-free cycle;
The cross interference between the measured gases is small.
Product characteristics
The gas concentration is measured by ultraviolet absorption spectrum and chemometrics algorithm and displayed in real time. The concentration is output in real time by RS232, RS485 and 4-20mA
Zero calibration and range calibration of manual and automatic event triggers (such as timing time, external switch input, etc.) can be achieved
Switching and analog output/input can be flexibly configured to achieve good coordination with external control systems
Each gas (except O2) supports two ranges, which can be switched automatically, manually or externally, with a range ratio of 10:1
Automatic spectral energy regulation is supported when the energy of the gas chamber lens is degraded due to sample gas pollution
Support remote configuration and remote diagnosis analyzer through GPRS
Technical index
Measurement technology: UV DOAS (, NO, NO2)
Range:
NO: 0~2000ppm(customizable)
NO2:0~2000ppm (customizable)
Linear error: ≤±1.5%F.S.
Repeatability: ≤0.5%
Zero drift: ≤±2%F.S. /7d
Range drift: ≤±2%F.S. /7d
Response time: < 10s (T90)
Preheating time: No preheating is required
Sample gas flow requirements: (0.5~2) L/min, fluctuation < 25%
Sample gas pressure requirement: current ambient pressure ±0.1bar
Sample temperature requirements: 0ºC~50ºC
Sample gas humidity requirements: no condensation (sample temperature)
4-20mA Input port: Two, flexible configuration, 100 Ohm load
Communication interface: RS485 (support Modbus protocol)
Protection class: IP42
Operating temperature: -10ºC~+40ºC
Working humidity: 0~95%
Overall dimensions: 177mm (H) ×483mm (W) ×434mm (D)
Voltage/Power: 220VAC±10%/ about 220W
Weight: about 12kg
| Item | Name | Model and description | Quantity |
| 1 | Networked gas chromatograph | The advanced carrier gas protection and gas path protection functions realize automatic gas path fault protection, automatic ignition, automatic flame-out, automatic gas path opening, and achieve one-key start. It adopts the advanced 10/100M adaptive Ethernet communication interface and built-in IP protocol stack. Temperature control area: 8 channels Temperature control range: room temperature above 4ºC ~ 450ºC, increment: 1ºC, accuracy: ±0.01ºC |
1 |
| 2 | thermal conductivity detector | Cut off gas self-protection function to protect the heat conduction pool. Sensitivity: S≥10000mV•ml/mg (high sensitivity) (benzene-toluene solution) Noise: ≤10μV Baseline drift: ≤30μV/30min Linear range: ≥104 |
1 |
| 3 | Fill column injector | Automatic pressure display, no mechanical pressure gauge to achieve automatic cut-off protection and leakage shutdown function | 1 |
| 4 | pressure sensor |
Accuracy: <±2% at full scale Reproducibility: <± 0.05KPa Temperature coefficient: <± 0.01KPa /°C Measuring range: 0 ~ 0.6MPa; |
1 |
| 5 | Networked chromatography workstation | Networked gas chromatography workstation can support multiple chromatographs (253 sets) to work at the same time, to achieve data processing and counter-control, to reach the industry-leading level of automatic control of cutting, blowback, sampling and other processes; And realize the operation control of chromatographic host. And can realize real-time data backup, remote operation | 1 |
| 6 | Automatic gas injection system | VICI imported from USA, includes all heating, insulation, temperature control systems and dosing tubes, valve drivers | 1 |
Q1: If you are factory or trade company?
we are manufacturer with more than 20 years.
Q2: What is your delivery time?
we promise in 60 days once deposit paid and workshop drawings confirmed
Q3: What is your payment terms?
we accept TT and L/C at sight.
Q4: What is your packing for all tank ?
We will fix the legs of the storage tank in the container
Q5: Can you provide OEM design?
yes, we can, we are factory under ourself R&D team, so custom tanks is welcome.and we can make customerbrand name on tank body, color, printing, etc...
Q6: What is your MOQ?
Our MOQ is 1pcs.
Q7: What is your advantage with other competitors?
We are factory with excellent equipment and high quality control system, and our factory price is more competitive, fast shipment with high quality, our service is also best with 24 hours on line for fast reply your requestments.
){kind=link}